Pressure Washer Nozzles & Nozzle Holders
We stock a comprehensive range of high-quality nozzles and nozzle accessories designed to maximise cleaning performance, efficiency, and versatility across a wide range of pressure washing applications. The correct nozzle selection is critical to achieving optimal results, from precise, high-impact cleaning to wider spray patterns for delicate or large surface areas.
Our nozzle range allows you to control spray angle, pressure, and flow rate to suit specific tasks, helping to reduce cleaning time, improve effectiveness and protect both equipment and surfaces. If you do not see the nozzle you require, please don’t hesitate to contact us, as we may be able to supply it or recommend a suitable alternative.
Pressure Washer Nozzles for Industrial & Commercial Cleaning
Low and High pressure nozzles in angles from 0 to 40 degrees. Please state angle and size required (use table above to work out size). These nozzles all have 1/4 male thread, we also supply 1/4F sockets if required.
This unit is an alternative to a double lance. By twisting knurled shroud, pressure can be reduced whilst maintaining the volume thus enabling detergent to be administered through an injection facility. Requires a nozzle of the correct size (see above).
Max. bar 250, max. vol 30 ltr/min, max temp 150C, Ports 2 x 1/4F 241.ADJNOZ
This unit is a simply engineered device for alternating nozzle widths/sizes etc. without the use of spanners. It accepts two different high pressure nozzles e.g. pencil jet and wide angle jet, which can be used alternatively by turning the lance over to set jet whilst trigger is not squeezed. Max bar 200, max vol 40 ltr/min, max temp 90C, 1/4F inlet, 2 x 1/4M outlets. 23001500
Rotating action gives enhanced cleaning capability. Pressure and volume of machine are required to determine nozzle size.
Max temp 100C, Max bar 210.
(350 bar)
